Hardware 101
Hardware Glossary
A visual reference to the cabinet, door, bathroom, and exterior hardware you'll encounter when specifying a project.
Barn Door
A sliding door mounted on an exposed track above the opening.
Bi-Fold Door
Two hinged panels that fold together when opened.
Bi-Pass Doors
Two sliding panels that pass each other on a shared track.
Double Doors
Two hinged doors that meet in the center and open from the middle.
Dutch Door
A door divided horizontally into two independently operating sections.
French Door
Double doors with glass panels that allow light and visibility between rooms.
Pivot Door
A door mounted on top and bottom pivots instead of side hinges.
Pocket Door
A sliding door that disappears into the wall when opened.
Swing Door
A single door mounted on side hinges that swings open and closed.
Keyed Function
A handle or knob that locks with a key from the outside and a thumbturn inside. Used on exterior doors.
Dummy Function
A fixed handle or knob that does not turn. Used for decorative doors or pull-only applications.
Passage Function
A non-locking handle or knob that operates a latch. Used on interior doors where privacy isn't required.
Privacy
A locking handle or knob for bedrooms and bathrooms. Locks from the inside with emergency exterior access.
Ball Catch
A spring-loaded ball installed in the door edge that holds the door closed. Typically used on double doors without active hardware.
Magnetic Latch
A latch that uses a magnet instead of a mechanical catch. Provides quiet operation and a clean, modern look.
Roller Latch
A spring-loaded roller that presses into a strike plate. Often used on closet or interior doors without a full latch set.
Drive In Latch
A cylindrical latch that installs without a faceplate. Typically used in interior residential doors.
Tubular Latch
A latch installed through a round hole in the door edge. Commonly used with knobs and levers in residential doors.
Deadbolt Cylinder
The key-operated cylinder inside a deadbolt that throws the locking bolt. Replaceable to rekey or upgrade.
Double Cylinder Deadbolt
Requires a key on both sides of the door. Often used on doors with glass panels.
Electronic Deadbolt
A keyless lock operated by keypad, touchpad, or smart system. Allows entry without a traditional key.
Euro Cylinder
A key cylinder shaped to fit European-style mortise locks. Often used with multipoint systems.
Flush Bolt
A bolt installed into the edge of a door and operated manually. Commonly used on the inactive leaf of double doors.
Mortise Cylinder
A threaded key cylinder that screws into a mortise lock body. Common in commercial and apartment doors.
Multipoint Lock
A locking system that secures the door at multiple points along the edge. Commonly used on exterior doors for added security.
Patio Deadbolt
A deadbolt designed for patio or balcony doors. Typically locks from the interior side only.
Rim Lock
A surface-mounted lock installed on the interior face of the door. Common in traditional or restoration-style applications.
Single Cylinder Deadbolt
Operated by a key on the outside and a thumbturn on the inside. The most common type of exterior deadbolt.
Mortise Lock
A rectangular lock installed inside a pocket cut into the door edge. Strong and durable, often used in higher-end or commercial doors.
North American Cylinder
A key cylinder built to the standard North American profile. Used in most residential locks and deadbolts.
Panic Door Bar
A horizontal push bar that unlatches a door instantly when pressed. Required on commercial exit doors.
Pocket Door Lock
A lock designed for sliding pocket doors. Provides privacy by securing the door within the wall.
Bar Door Lock
A surface-mounted latch designed for sliding barn doors. Provides basic privacy for interior spaces.
Chain Bolt
A spring-loaded bolt with a pull chain, mounted at the top of a door to secure the inactive leaf of a pair.
Hook Eye
A simple latch consisting of a hook and a loop. Provides light-duty security.
Rim Night Latch
A surface-mounted lock operated by a key from the outside and a thumbturn inside. Automatically locks when the door closes.
Spring Lock
A latch that locks automatically when the door closes, held by a spring-loaded bolt. Opens with a key or handle.
Surface Bolt
A manually operated bolt mounted to the surface of a door. Used to secure one leaf of double doors.
Cremone Bolt
A vertical locking system with rods that extend into the top and bottom of the frame. Often used on French doors or cabinets.
Dutchdoor Quadrant Lock
A small surface-mounted lock with a pivoting arm that drops into a strike plate. Commonly used on Dutch doors.
Pivot Hinge Center
A hinge mounted at the top and bottom of a door instead of the side.
Plain Bearing Hinge
A standard hinge without internal bearings. Commonly used on lightweight interior doors.
Ball Bearing Hinge
A hinge with internal ball bearings that reduce friction. Used for heavier or frequently used doors.
Barrel Hinge
A cylindrical hinge installed inside the door and frame. Hidden when the door is closed.
Concealed Hinge
A hinge hidden from view when the door is closed. Common in modern cabinetry.
Knife Hinge
A slim hinge that pivots on a narrow blade inserted into the door and frame.
Lift Off Hinge
A hinge that allows the door to be removed without unscrewing it.
Offset Hinge
A hinge that shifts the pivot point away from the door edge to allow wider opening.
Olive Knuckle Hinge
A hinge with decorative rounded joints along the barrel. Often used in traditional designs.
Piano Continuous Hinge
A long hinge that runs the full height of the door. Provides even support and alignment.
Spring Hinge
A hinge with a built-in spring that automatically closes the door.
Swing Hinge
A hinge that allows a door to swing in both directions.
ASA Strike Plate
A heavy-duty strike plate with an extended lip. Commonly used on commercial doors.
Full Lip Strikeplate
A strike plate with a curved lip that helps guide the latch into place. Common on residential doors.
Latch Faceplate
A rectangular plate installed on the door edge around the latch. Provides a finished surface for mounting.
Latch Plate
A rectangular plate installed on the door edge around the latch. Provides a finished surface for mounting.
T Strike Plate Mortise
A strike plate with a reinforced shoulder design. Used for added strength and durability.
T Strike Plate Mortise
A strike plate with a reinforced shoulder design. Used for added strength and durability.
Full Lip Strike
A strike plate with a curved lip that helps guide the latch into place. Common on residential doors.
Door Pull + Deadbolt
A fixed door pull paired with a separate deadbolt and roller latch. Used when no lever is needed.
Electronic Deadbolt + Grip Set
A keypad deadbolt paired with a fixed grip handle. Allows keyless entry on exterior doors.
Full Grip Set
A fixed exterior grip with a thumb latch and separate deadbolt above. Common on front entry doors.
Key In Lever
A lever with a built-in key cylinder. Locks and unlocks using a key from the outside.
Monolithic Grip Set
A full-length backplate with integrated grip and lock. Often used on modern exterior doors.
Multi Point Lock
Exterior trim designed to operate a multipoint locking system. Locks the door at several points along the edge.
Passage Set + Deadbolt
A lever or knob paired with a separate deadbolt above. Common on exterior doors for everyday use and added security.
Passage Set + Privacy Bolt
A passage handle with a separate privacy bolt. Allows basic latching with additional interior locking.
Sectional Grip Set
A grip mounted in separate pieces rather than one long plate. Allows flexible placement of lock components.
Side Plate Handle
A lever mounted on a decorative backplate, often paired with a separate deadbolt. Common in traditional door designs.
Electronic Deadbolt Lever
A keypad or smart deadbolt paired with a matching lever. Allows secure entry using a code or app instead of a key.
Grip Thumblatch
A fixed entry grip with a thumb-operated latch above the handle. A classic look for front doors.
Back To Back Pull
Two pulls mounted on opposite sides of a door.
Curved Scroll Lever
A lever with a curved, flowing shape for a traditional style.
Disk Knob
A flat, circular knob with a clean, modern profile.
Flush Pulls
A recessed pull set into the face of a door or drawer so nothing protrudes. Common on sliding and pocket doors.
Handles Back To Back Pull
Two pulls mounted on opposite sides of a door.
Oval Egg Knob
An oval-shaped knob that fits comfortably in the hand.
Oversized Door Knob
A larger-scale knob designed for visual impact.
Push Pull Plate
A flat plate used to push or pull a door without a lever.
Push Pull Plate
A flat plate used to push or pull a door without a lever.
Round Knob
A circular knob with a smooth, traditional form.
Square Knob
A knob with straight edges and sharp corners.
Straight Lever
A simple, straight handle with a clean, modern appearance.
T Knob Lever
A horizontal bar-style knob shaped like a “T.”
Tapered Lever
A lever that narrows toward the end for a refined profile.
Textured Knob
A knob with a patterned surface for grip.
Textured Lever
A lever with a patterned surface for added grip and detail.
Cremone Bolt
A vertical locking system with rods that extend into the top and bottom of the frame. Often used on French doors or cabinets.
Bell Button Door
A button mounted to a door frame to activate a doorbell.
Door Knocker
A decorative piece used to announce visitors.
Door Stop
A device installed to prevent a door from hitting a wall.
Door Viewer Peep Hole
A small lens installed in a door to see outside.
Gate Hardware
Weather-resistant hinges, latches, and pulls used to hang and secure an exterior gate.
House Numbers
Numbers mounted to the exterior to identify a home.
Kick Plate
A protective plate installed at the bottom of a door.
Mail Slot
An opening installed in a door or wall for mail delivery.
Signage
A mounted plate used for identification or direction.
Drop Knob
A single pull that hangs from one mounting point.
Glass Acrylic Pull
A pull with a clear center and metal mounts.
Side By Side Pulls 2
Two pulls mounted parallel on the same drawer or door.
Side By Side Pulls
Two pulls mounted parallel on the same drawer or door.
Textured Pull
A pull with a patterned surface for added grip.
Wire Pull
A thin metal pull formed from bent wire.
Appliance Pull
An oversized pull designed for heavy appliances.
Arched Pull
A curved pull mounted with two posts.
Backplate
A plate mounted behind a pull for protection or style.
Bar Pull
A straight pull with two mounting posts.
Cup Pull
A half-moon pull with a recessed grip.
Drop Pull
A single pull that hangs from one mounting point.
Edge Pull
A pull mounted to the top edge of a door or drawer.
Flush Edge Pull
A recessed pull installed into the door or drawer edge.
Flush Ring Pull
A recessed ring that folds flat when not in use.
Ring Pull
A circular pull mounted on a central post.
Tab Pull
A small pull mounted at the top or side edge.
Cylindrical Knob
A cylindrical knob with straight sides.
Geometric Knob
A knob with defined angular shapes.
Glass Acrylic Knob
A glass or crystal knob with faceted edges.
Inlay Knob
A knob featuring a contrasting material in its face.
Mushroom Knob
A rounded knob with a slightly domed top.
Porcelain Knob
A ceramic knob with a smooth finish.
Textured Knob
A knob with a patterned surface for grip.
Ball Knob
A round knob with a spherical shape.
Decorative Knob
A knob with unique shaping used as a design accent.
Knob Plate
A plate installed behind a knob for protection or detail.
Square Knob
A knob with straight edges and sharp corners.
T Knob
A horizontal bar-shaped knob.
Free Standing Accessories
Unmounted pieces such as trays, holders, and dishes placed on a counter or vanity rather than fixed to the wall.
Freestanding Vanity Mirror
A freestanding mirror placed on a counter or vanity.
Glass Shelves
A wall-mounted shelf made of glass.
Grab Bar
A sturdy bar installed for support and safety.
Paper Towel Bar
A holder designed to store and dispense paper towels.
Robe Hook
A single hook mounted to the wall or door for hanging robes or towels.
Shower Door Pull Towel Bar
A handle mounted to a glass shower door.
Shower Rod
A rod installed above a shower to hold a curtain.
Soap Dish
A tray designed to hold bar soap.
Soap Dispenser
A container for liquid soap, mounted or placed on a counter.
Table Top Containers
Small containers used to store bathroom essentials.
Tissue Holder
A wall-mounted holder for toilet paper rolls.
Toilet Bowl Brush
A cleaning brush stored in a matching holder.
Towel Bar
A horizontal bar mounted to the wall for hanging towels.
Towel Ring
A circular ring mounted near sinks for hand towels.
Towel Shelf
A wall-mounted shelf with bars for storing and hanging towels.
Towel Warmer
A heated rack used to warm and dry towels.
Tumbler
A wall-mounted holder for cups and toothbrushes.
Wall-Mounted Vanity Mirror
A mirror mounted to the wall, often adjustable.
Wire Soap Baskets
A wall-mounted basket used to hold soap or small toiletries.
Bell Button Door
A button mounted to a door frame to activate a doorbell.
Door Knocker
A decorative piece used to announce visitors.
Door Viewer
A small lens installed in a door to see outside.
Gate Hardware
Weather-resistant hinges, latches, and pulls used to hang and secure an exterior gate.
House Numbers
Numbers mounted to the exterior to identify a home.
Kick Plate
A protective plate installed at the bottom of a door.
Mail Slot
An opening installed in a door or wall for mail delivery.
Mailbox
A box designed to receive and store mail.
Signage
A mounted plate used for identification or direction.
Grilles Cabinet
A decorative metal grille set into a cabinet door for ventilation and a furniture-like detail.
Name Plate
A small mounted plate used to display a name or number at an entry.
Cabinet Latch
A small catch that holds a cabinet door closed until released by hand.
Cremone Bolt
A vertical locking system with rods that extend into the top and bottom of the frame. Often used on French doors or cabinets.
Ice Box Fridge Latch
A heavy lever latch styled after vintage ice boxes, used on cabinetry or panelled refrigerators.
Ready to Specify?
Visit the Vancouver showroom to see, touch, and operate hardware in person — or download the complete specification guide to share with your contractor or designer.
